50 Kva Step Down Pad Mount Transformer 3 Phase

To supply 50 Kva Step Down Pad Mount Transformer 3 Phase, Conso Electrical Technology and Science Co., Ltd has a well-established quality control system from the decades manufacturing experience. Because of this, Conso Electrical has assembled pad mount transformers to State Grid Corporation of China and local urban construction group corporations as one of the original manufactures. Compare with the Compact substation, a 3 phase 50 kva step down pad mount transformer has the same function but more tight feature. it could be load in a 20 GP container.

Send Inquiry

Product Description

Video

50 kva step down pad mount transformer 3 phase Maintenance：

1.Check the Power Supply Line

Regularly inspect the power supply lines of the 3 phase 50 kva step down pad mount transformer to ensure a secure and stable connection. Additionally, check for any damage or signs of aging in the power supply lines, and replace them if necessary.

2.Inspect the Cooling System

The cooling system is a critical component of the 3 phase 50 kva step down pad mount transformer. Periodically examine the operation of the cooling system to ensure that the cooling fluid is flowing correctly. If you discover a shortage of cooling fluid or if it has deteriorated, replace or add new cooling fluid promptly.

3.Accurately Measure Voltage and Current

Regularly employ specialized instruments to measure the voltage and current of the 3 phase 50 kva step down pad mount transformer, ensuring that the output voltage and current meet the design requirements. If there are any deviations, adjustments or replacements of relevant components should be made promptly.

50 kva step down pad mount transformer 3 phase Technical Parameter:

Mode Number:	ZGS11-50;
Rated Capacity:	50 kva;
Primary Voltage:	10 11 33 kV or depends;
Secondary Voltage:	0.23kV, 0.4 kV or depends;
Protection Rate:	IP68 for Transformer Tank, IP54 for Enclosure;
Impedance:	4%±10%;
Relative Humidity:	≤95%(daily average), ≤90%(monthly average);
Rated Frequency:	50 or 60Hz;
Winding Material:	100% Copper or 100% Aluminum;
Rated Breaking Current:	50 KA.